Wooden French Doors, bespoke made to the highest quality.
The sill for this door is hardwood, with the doors and frame being hardwood or pine.
Would cost around £5,000 if you were to order new direct.
The door thickness is 5.6cm compared to the standard factory 4.4cm.
Condition
- Part installed and removed the same day.
- Mis-measure made to slightly the wrong specifications and is now surplus to requirements.
- Not bowed or rotted at all.
- There is a cosmetic mark at the top of the frame (see photos), which could be covered by trim when installed.
- Small dent on the external side (see photos). This could be repaired by a competent carpenter.
- Missing the handles (see photos), however, these are available to purchase online and easy to fit.
Security
- 5 point ‘Wink Haus’ locking system making it very secure.
Opening
- Externally opening doors.
- When viewing from the outside, the main traffic door is located on the right.
Glazing
- Glazing is 28mm thick double glazed, clear, black warm edge spacer bar, Low E, filled with Argon gas for extra efficiency.
- There is no condensation occurring inside the pane/s.
- Has Georgian Bars internally, externally & internally inside the glazing, giving a high-quality appearance. These cannot be removed, so if you required completely clear glass, you would need to replace all the units.
- We can order replacement clear glazing for an additional £345 including VAT. This would be delivered along with the doors, ready to be installed by your fitter.
Colour
- The colour externally and internally is White, with a matching frame either side.
- Powder coating offers a tough and resilient coating with a high quality finish, requiring no maintenance
- The colour of the hinges is White.
Ref No. 4SW15-20-3-1 (Unit 11 N11 & H34)(AW)